PUMAPUNKU

Post 1399

PUMAPUNKU

From Wikipedia, the free encyclopedia and others
Puma Punku, Bolivia

by 

Selected for Google Earth [?] – ID: 1286565

Pumapunku also called “Puma Pumku” or “Puma Puncu”, is part of a large temple complex or monument group that is part of theTiwanaku Site near Tiwanaku, Bolivia. Tiwanaku is signifigant in Incan traditions because it is believed to be the site where the world was created. In Aymara, Puma Punku’s name means, “The Door of the Puma”. The Pumapunku complex consists of an unwalled western court, a central unwalled esplanade, a terraced platform mound that is faced with megalithic stone, and a walled eastern court. The Pumapunku is a terraced earthen mound that is faced with megalithic blocks. It is 167.36 meters wide along its north-south axis and 116.7 meters long along its east-west axis. On the northeast and southeast corners of the Pumapunku it has 20-meter wide projections that extend 27.6 meters north and south from the rectangular mound. The eastern edge of the Pumapunku is occupied by what is called the “Plataforma Lítica.” The Plataforma Lítica consists of a stone terrace that is 6.75 by 38.72 meters in dimension. This terrace is paved with multiple enormous stone blocks.

File:Puma Punku6.jpg

Stone block with a set of blind holesof complex shape

The Plataforma Lítica contains the largest stone slab found in both the Pumapunku and Tiwanaku Site. This stone slab is 7.81 meters long, 5.17 meters wide and averages 1.07 meters thick. Based upon the specific gravity of the red sandstone from which it was carved, this stone slab has been estimated to weigh 131 metric tons.The other stonework and facing of the Pumapunku consists of a mixture of andesite and red sandstone. The core of the Pumapunku consists of clay. The fill underlying selected parts of the edge of the Pumapunku consists of river sand and cobbles instead of clay. Excavations at the Pumapunku have documented “three major building epochs, in addition to small repairs and remodeling.

El Secretario, Puma Punku

by 

Selected for Google Earth [?] – ID: 1286497

At its peak, Pumapunku is thought to have been “unimaginably wondrous”,adorned with polished metal plaques, brightly colored ceramic and fabric ornamentation, trafficked by costumed citizens, elaborately dressed priests and elites decked in exotic jewelry. Current understanding of this complex is limited due to its age, the lack of a written record, the current deteriorated state of the structures due to treasure hunting, looting, stone mining for building stone and railroad ballast, and natural weathering.

The area within the kilometer separating the Pumapunku and Kalasasaya complexes has been surveyed using ground-penetrating radar,magnetometry, induced electrical conductivity, and magnetic susceptibility. The geophysical data collected from these surveys and excavations have revealed in the area between the Pumapunku and Kalasasaya complexes the presence of numerous man-made structures. These structures include the wall foundations of buildings and compounds, water conduits, pool-like features, revetments, terraces, residential compounds, and widespread gravel pavements all of which now lie buried and hidden beneath the modern ground’s surface.

File:Puma Punku7.jpg
An example of high-precision small holes

Age

Determining the age of the Pumapunku complex has been a focus of researchers since the discovery of the Tiwanaku site. As noted by Andean specialist, Binghamton University Anthropology professor W. H. Isbell, a radiocarbon date was obtained by Vranich from organic material from lowermost and oldest layer of mound-fill forming the Pumapunku. This layer was deposited during the first of three construction epochs and dates the initial construction of the Pumapunku at 1510 ±25 B.P. C14 (AD 440; calibrated, AD 536–600). Since the radiocarbon date came from the lowermost and oldest layer of mound-fill underlying the andesite and sandstone stonework, the stonework must have been constructed sometime after 1510 ±25 B.P. C14. The excavation trenches of Vranich show that the clay, sand, and gravel fill of the Pumapunku complex lie directly on the sterile middlePleistocene sediments. These excavation trenches also demonstrated the lack of any pre-Andean Middle Horizon cultural deposits within the area of the Tiwanaku Site adjacent to the Pumapunku complex.

Engineering

File:Pumapunkubolivia.jpg

Detail of stone with precisely cut straight line and tooled holes within the line

The largest of these stone blocks is 7.81 meters long, 5.17 meters wide, averages 1.07 meters thick, and is estimated to weigh about 131 metric tons. The second largest stone block found within the Pumapunka is 7.90 meters long, 2.50 meters wide, and averages 1.86 meters thick. Its weight has been estimated to be 85.21 metric tons. Both of these stone blocks are part of the Plataforma Lítica and composed of red sandstone. Based upon detailed petrographic and chemical analyses of samples from both individual stones and known quarry sites, archaeologists concluded that these and other red sandstone blocks were transported up a steep incline from a quarry nearLake Titicaca roughly 10 km away. Smaller andesite blocks that were used for stone facing and carvings came from quarries within the Copacabana Peninsula about 90 km away from and across Lake Titicaca from the Pumapunka and the rest of the Tiwanaku Site.

Illustrating the sophisticated way in which the Puma-punka stones fit together. (Right) A stone gateway from the Akapana pyramid shows the same modular feature.http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

Archaeologists argue that the transport of these stones was accomplished by the large labor force of ancient Tiwanaku. Several theories have been proposed as to how this labor force transported the stones although these theories remain speculative. Two of the more common proposals involve the use of llama skin ropes and the use of ramps and inclined planes.

The numerous H-shaped blocks have approximately 80 faces on each. They all match each other with extreme precision suggesting that the architects used a system of preferred measurements and proportions.http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

In assembling the walls of Pumapunku, each stone was finely cut to interlock with the surrounding stones and the blocks fit together like a puzzle, forming load-bearing joints without the use of mortar. One common engineering technique involves cutting the top of the lower stone at a certain angle, and placing another stone on top of it which was cut at the same angle. The precision with which these angles have been utilized to create flush joints is indicative of a highly sophisticated knowledge of stone-cutting and a thorough understanding ofdescriptive geometry. Many of the joints are so precise that not even a razor blade will fit between the stones. Much of the masonry is characterized by accurately cut rectilinear blocks of such uniformity that they could be interchanged for one another while maintaining a level surface and even joints. The blocks were so precisely cut as to suggest the possibility of prefabrication and mass production, technologies far in advance of the Tiwanaku’s Incan successors hundreds of years later. Tiwanaku engineers were also adept at developing a civic infrastructure at this complex, constructing functional irrigation systems, hydraulic mechanisms, and waterproof sewage lines.

Architecture

File:Interlock 1.jpg

Demonstration of the building block technique

File:7 Puma Punku.jpg

Demonstration of the building block technique

Puma Punku was a large earthen platform mound with three levels of stone retaining walls. Its layout is thought to have resembled a square. To sustain the weight of these massive structures, Tiwanaku architects were meticulous in creating foundations, often fitting stones directly to bedrock or digging precise trenches and carefully filling them with layered sedimentary stones to support large stone blocks. Modern day engineers argue that the base of the Pumapunku temple was constructed using a technique called layering and depositing. By alternating layers of sand from the interior and layers of composite from the exterior, the fills would overlap each other at the joints, essentially grading the contact points to create a sturdy base.

http://www.history.com/shows/ancient-aliens/photos/ancient-aliens-image-gallery/photo10

Notable features at Pumapunku are I-shaped architectural cramps, which are composed of a unique copper-arsenic-nickel bronze alloy. These I-shaped cramps were also used on a section of canal found at the base of the Akapana pyramid at Tiwanaku. These cramps were used to hold the blocks comprising the walls and bottom of stone-lined canals that drain sunken courts. I-cramps of unknown composition were used to hold together the massive slabs that formed Pumapunku’s four large platforms. In the south canal of the Pumapunku, the I-shaped cramps were cast in place. In sharp contrast, the cramps used at the Akapana canal were fashioned by the cold hammering of copper-arsenic-nickel bronze ingots. The unique copper-arsenic-nickel bronze alloy is also found in metal artifacts within the region between Tiwanaku and San Pedro de Atacama during the late Middle Horizon around 600–900.

http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

Cultural and spiritual significance

It is theorized the Pumapunku complex as well as its surrounding temples, the Akapana pyramid, KalasasayaPutuni and Kerikala functioned as spiritual and ritual centers for the Tiwanaku. This area might have been viewed as the center of the Andean world, attracting pilgrims from far away to marvel in its beauty. These structures transformed the local landscape; Pumapunku was purposely integrated with Illimani mountain, a sacred peak that the Tiwanaku possibly believed to be home to the spirits of their dead. This area was believed to have existed between heaven and Earth. The spiritual significance and the sense of wonder would have been amplified into a “mind-altering and life-changing experience” through the use of hallucinogenic plants. Examinations of hair samples exhibit remnants of psychoactive substances in many mummies found in Tiwanaku culture mummies from Northern Chile, even those of babies as young as 1 year of age, demonstrating the importance of these substances to the Tiwanaku.

http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

As was characteristic of civilizations around this time, the Tiwanaku actively incorporated human sacrifice into their culture. The remains of dismembered bodies have been found throughout the area. Ceramic artifacts depict imagery of warriors, masked with puma skulls, decapitating their enemies and holding trophy skulls, adorned with belts of human heads with their tongues torn out. It is believed that ,because of certain markings on stones found at Puma Punku ,the Gateway of the sun was originally part of Puma Punku.

The largest of these stone blocks is 7.81 meters long, 5.17 meters wide, averages 1.07 meters thick, and is estimated to weigh about 131 metric tons. The second largest stone block found within the Puma punka is 7.90 meters long, 2.50 meters wide, and averages 1.86 meters thick. Its weight has been estimated to be 85.21 metric tons. 

 

 

The quarry for these blocks was on the western shore of Titicaca, ten miles distant. 

http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

Peak and decline

The Tiwanaku civilization and the use of these temples appears to some to have peaked from 700 to 1000 AD. by which point the temples and surrounding area may have been home to some 400,000 people. By this point, an extensive infrastructure had been developed with a complex irrigation system running over 30 square miles (80 km2) to support potatoes, quinoa, corn and other various crops. At its peak the Tiwanaku culture dominated the entire Lake Titicaca basin as well as portions of Bolivia and Chile.

Other examples of ‘Brick Ties’ can be seen in the floor at Puma-punka. It is now believed that theses ‘Ties’ were made by pouring molten metal into the prepared holes. A portable smelter operating at extremely high temperatures would have been required for this purpose.

http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

The culture in question seems to have dissolved rather abruptly some time around 1000 AD and researchers are still seeking answers as to why. A likely scenario involves rapidenvironmental change, possibly involving an extended drought. Unable to support the massive crop yields necessary for their large population, the Tiwanaku are argued to have scattered into the local mountain ranges only to disappear shortly thereafter. Puma Punku is thought to have been abandoned before it was finished.

Drawing from 1877 , and recent photo , of the same stone – although slightly more broken.

http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

The ‘Before’ photo (pre-restoration)..http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

In the photo above, the same small drill holes can be seen in several areas where they appear to have been used as miniature ‘pilot-holes’, – perhaps in order to assist splitting the stone.http://www.ancient-wisdom.co.uk/boliviapumapunka.htm

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 63 other followers

%d bloggers like this: